Related Sites
Ansys Tutorial for reinforced concrete with FRP | iMechanica
Does anyone have an Ansys tutorial for reinforced concrete with FRP? I have to model a beam for my thesis and I am new to Ansys. If you could send it to me at the below email address I would greatly appreciate it. ...
Does anyone have an Ansys tutorial for reinforced concrete with FRP? I have to model a beam for my thesis and I am new to Ansys. If you could send it to me at the below email address I would greatly appreciate it. ...
  
 |
pin forces in ANSYS | iMechanica
i am doing static analysis on a pick and carry crane, i need to find the pin forces. for this i created entity set with the nodes where the forces are to be derived and ran a static analysis in ansys.In order to derive the forces ...
i am doing static analysis on a pick and carry crane, i need to find the pin forces. for this i created entity set with the nodes where the forces are to be derived and ran a static analysis in ansys.In order to derive the forces ...
|
|
Equipment Stress Engineer / DOE exp. / ANSYS / Contract - WA ...
Equipment Stress Engineer / DOE exp. / ANSYS / Contract - WA - Find nuclear jobs at Roadtechs.com.
Equipment Stress Engineer / DOE exp. / ANSYS / Contract - WA - Find nuclear jobs at Roadtechs.com.
|
|
How I could import Ansys mesh into CFX? -- CFD Online Discussion ...
Dears, I wanna import ansys mesh into CFX (I have ansys 12). I can import the mesh, but I can't define the boundary condition, because CFX consider.
Dears, I wanna import ansys mesh into CFX (I have ansys 12). I can import the mesh, but I can't define the boundary condition, because CFX consider.
|
|
ANSYS, Inc. - ANSYS, Inc. Reports Continued Growth Momentum in ...
PITTSBURGH, Aug 05, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), today announced in-line performance against its outlook in revenue and over-performance in non-GAAP EPS for the second quarter of 2010. Double digit revenue growth ...
PITTSBURGH, Aug 05, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), today announced in-line performance against its outlook in revenue and over-performance in non-GAAP EPS for the second quarter of 2010. Double digit revenue growth ...
|
|
ANSYS, Inc. - ANSYS Integrates Advanced Fatigue Capabilities from ...
PITTSBURGH, Aug 19, 2010 (BUSINESS WIRE) -- Seamless design optimization from ANSYS, Inc. (NASDAQ: ANSS) now incorporates the advanced fatigue capabilities of nCode DesignLife(TM), a leading durability software from HBM used by OEMs and ...
PITTSBURGH, Aug 19, 2010 (BUSINESS WIRE) -- Seamless design optimization from ANSYS, Inc. (NASDAQ: ANSS) now incorporates the advanced fatigue capabilities of nCode DesignLife(TM), a leading durability software from HBM used by OEMs and ...
|
|
LBB Modeling in ANSYS | iMechanica
LBB modeling in ANSYS. Submitted by behzadhemmati on Sat, 2010-09-04 23:56. Hi every one. i realy need to know how can model and solve LBB condition for a simple example in ANSYS.please help me. god bless you. mof15922@yahoo.com ...
LBB modeling in ANSYS. Submitted by behzadhemmati on Sat, 2010-09-04 23:56. Hi every one. i realy need to know how can model and solve LBB condition for a simple example in ANSYS.please help me. god bless you. mof15922@yahoo.com ...
|
|
ANSYS, Inc. - ANSYS Ranked on FORTUNE 100 Fastest-Growing ...
PITTSBURGH, Aug 24, 2010 (BUSINESS WIRE) -- ANSYS (NASDAQ: ANSS) has been ranked number 39 on the 2010 FORTUNE 100 Fastest-Growing Companies list. The ranking includes ANSYS as the sole provider of product development software, ...
PITTSBURGH, Aug 24, 2010 (BUSINESS WIRE) -- ANSYS (NASDAQ: ANSS) has been ranked number 39 on the 2010 FORTUNE 100 Fastest-Growing Companies list. The ranking includes ANSYS as the sole provider of product development software, ...
|
|
Buy Calls in Computer-Simulation Firm Ansys - Barrons.com
With correlation riding high, calls can safely allow exposure to the upside.
With correlation riding high, calls can safely allow exposure to the upside.
|
|
material diferent ansys | iMechanica
hi all i have a problem in ansys I have a doubt in one piece ansys mechanical traction with different materials as I have to place these materials is composed of a material astm a 572 gr 50 and the other is a 106 gr 6 astm pipe diameter ...
hi all i have a problem in ansys I have a doubt in one piece ansys mechanical traction with different materials as I have to place these materials is composed of a material astm a 572 gr 50 and the other is a 106 gr 6 astm pipe diameter ...
|
|
FEA.RU | CompMechLab - ANSYS Ranked on FORTUNE 100 Fastest-Growing ...
ANSYS, Inc. has been ranked number 39 on the 2010 FORTUNE 100 Fastest-Growing Companies list. The ranking includes ANSYS as the sole provider of product development software, a recognition that underscores the strategic value of ...
ANSYS, Inc. has been ranked number 39 on the 2010 FORTUNE 100 Fastest-Growing Companies list. The ranking includes ANSYS as the sole provider of product development software, a recognition that underscores the strategic value of ...
|
|
Ansys Training Rapidshare Free Full Downloads with Hotfile and ...
Ansys Training Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
Ansys Training Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
|
|
ANSYS Modeling help on Concrete Plate supported by Wood bars ...
I used Ansys to model a concrete slab supported on the wood to simulate my experimental vibration test. The materials are already very close to the real materials, and the Boundary conditions: simply supported wood support. ...
I used Ansys to model a concrete slab supported on the wood to simulate my experimental vibration test. The materials are already very close to the real materials, and the Boundary conditions: simply supported wood support. ...
|
|
ansys rotor dynamics analysis | iMechanica
ansys rotor dynamics analysis. masoudeng's picture. Submitted by masoudeng on Wed, 2010-09-01 08:32. software. dear all. I need information about ansys rotor dynamics modeling and vibration analysis. please help me in this reserc. ...
ansys rotor dynamics analysis. masoudeng's picture. Submitted by masoudeng on Wed, 2010-09-01 08:32. software. dear all. I need information about ansys rotor dynamics modeling and vibration analysis. please help me in this reserc. ...
|
|
ANSYS, Inc. - ANSYS Releases Ansoft Designer 6.0 with Solver on ...
Ansoft Designer 6.0 provides a powerful user interface to HSPICE with direct links to HFSS and access to the ANSYS QuickEye(TM) and VerifEye(TM) convolution and statistical eye analysis as well as IBIS-AMI technology. ...
Ansoft Designer 6.0 provides a powerful user interface to HSPICE with direct links to HFSS and access to the ANSYS QuickEye(TM) and VerifEye(TM) convolution and statistical eye analysis as well as IBIS-AMI technology. ...
|
|
Crack Generation Ansys Tutorials Rapidshare Free Full Downloads ...
Crack Generation Ansys Tutorials Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
Crack Generation Ansys Tutorials Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
|
|
[Other] Ansys meshing airfoil and / or compressor blades -- CFD ...
Hi, First of all let me say that I saw there are a lot of questions concerning airfoil meshing and I did read a lot of them for the last few weeks. If.
Hi, First of all let me say that I saw there are a lot of questions concerning airfoil meshing and I did read a lot of them for the last few weeks. If.
|
|
ANSYS, Inc. - ANSYS to Release Second Quarter 2010 Earnings on ...
SOUTHPOINTE, Pa., Jul 12, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS) announced today that the global innovator of simulation software and technologies designed to optimize product development processes expects to release its ...
SOUTHPOINTE, Pa., Jul 12, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS) announced today that the global innovator of simulation software and technologies designed to optimize product development processes expects to release its ...
|
|
Requirement of Software Development Engineer at ANSYS India Pune ...
Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 40 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ approximately 1400 people and distribute ANSYS products through a network of ...
Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 40 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ approximately 1400 people and distribute ANSYS products through a network of ...
|
|
ANSYS, Inc. - ANSYS CEO to Present at Oppenheimer Annual ...
PITTSBURGH, Jul 30, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), announced today that James E. Cashman III, president and chief executive officer of ANSYS, Inc., will present a company overview and answer questions at the ...
PITTSBURGH, Jul 30, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), announced today that James E. Cashman III, president and chief executive officer of ANSYS, Inc., will present a company overview and answer questions at the ...
|
|
ANSYS VISCOELASTIC MODELING | iMechanica
I am trying to model a sheet of Poly Vinyl Butryl (PVB), which is a viscoelastic material in ANSYS. I have all the regular properties like elastic, shear and bulk modulus, poisson ratio, denstiy and damping factor. ...
I am trying to model a sheet of Poly Vinyl Butryl (PVB), which is a viscoelastic material in ANSYS. I have all the regular properties like elastic, shear and bulk modulus, poisson ratio, denstiy and damping factor. ...
|
|
HPCwire: ANSYS Integrates Advanced Fatigue Capabilities from HBM-nCode
Design optimization from ANSYS now incorporates the advanced fatigue capabilities of nCode DesignLife, a durability software from HBM used by OEMs and their suppliers around the world.
Design optimization from ANSYS now incorporates the advanced fatigue capabilities of nCode DesignLife, a durability software from HBM used by OEMs and their suppliers around the world.
|
|
VEKTORRUM » Ansys Makes FORTUNE 100 Fastest-Growing Companies List ...
The simulation and analysis software vendor makes Fortune's list for the second straight year. Ansys (NASDAQ: ANSS) has been ranked number 39 on the 2010 FORTUNE 100 Fastest-Growing Companies list. It is the only product development ...
The simulation and analysis software vendor makes Fortune's list for the second straight year. Ansys (NASDAQ: ANSS) has been ranked number 39 on the 2010 FORTUNE 100 Fastest-Growing Companies list. It is the only product development ...
|
|
Ansys 12 (x64bit)
ANSYS is a universal design software based on finite element method, for mono-and multi-payment. During the 35-year history of its presence in the market program in vybilas leaders in its class by the number of jobs in the world. ...
ANSYS is a universal design software based on finite element method, for mono-and multi-payment. During the 35-year history of its presence in the market program in vybilas leaders in its class by the number of jobs in the world. ...
|
|
ANSYS, Inc. - Tetra Pak Chooses ANSYS for Product Development ...
The Swedish company is applying Simulation Driven Product Development(TM) using ANSYS software, which enables system analysis and leverages single-component modeling as an integrated part of the process. Technology from ANSYS enables ...
The Swedish company is applying Simulation Driven Product Development(TM) using ANSYS software, which enables system analysis and leverages single-component modeling as an integrated part of the process. Technology from ANSYS enables ...
|
|
VEKTORRUM » Ansys Workbench Adds Durability & Fatigue Testing ...
Ansys Workbench now offers the option of using nCode DesignLife software from HBM-ncode for advanced fatigue and stress analysis. The add-on is designed to allow engineering simulation of product life and durability issues before a ...
Ansys Workbench now offers the option of using nCode DesignLife software from HBM-ncode for advanced fatigue and stress analysis. The add-on is designed to allow engineering simulation of product life and durability issues before a ...
|
|
Ansys workbench tutorial v.11 » EvoDl - rapidshare, megaupload ...
Description: 1.Creating 3D geometry (3D important) (tutorial 4_1-4_3) 2.Sozdanie surfaces (Surface) (tutorial 5_1-5_4) 3.Raschet ray (tutorial 6_1) 4.Raschet timber with Simulation Wizzard (
Description: 1.Creating 3D geometry (3D important) (tutorial 4_1-4_3) 2.Sozdanie surfaces (Surface) (tutorial 5_1-5_4) 3.Raschet ray (tutorial 6_1) 4.Raschet timber with Simulation Wizzard (
|
|
Ansys 12.x Linux Workarounds -- CFD Online Discussion Forums
Hello, I have had a lot of headache when migrating from openSuse 11.2 to 11.3 regarding Ansys Workbench (in general) and designModeler (in particular).
Hello, I have had a lot of headache when migrating from openSuse 11.2 to 11.3 regarding Ansys Workbench (in general) and designModeler (in particular).
|
|
ANS - Ans - Ansys Limited - Presentation On Website - 26/08/2010
ANS - Ansys Limited - Presentation on Website ANSYS LIMITED (Incorporated in the Republic of South Africa) (Registration number: 1987/001222/06) (Share Code: ANS ISIN Code: ZAE000097028) ("Ansys" or "the Company") PRESENTATION ON ...
ANS - Ansys Limited - Presentation on Website ANSYS LIMITED (Incorporated in the Republic of South Africa) (Registration number: 1987/001222/06) (Share Code: ANS ISIN Code: ZAE000097028) ("Ansys" or "the Company") PRESENTATION ON ...
|
|
How to convert ansys workbench file to the file for paraview ...
Hi, Everyone, I created a model in ansys workbench(awb12). I want to use paraview to open the model. Awb 12 only export mechdat, mesh, prj, cgns, I.
Hi, Everyone, I created a model in ansys workbench(awb12). I want to use paraview to open the model. Awb 12 only export mechdat, mesh, prj, cgns, I.
|
|
Analysis of grinding using nano cutting fluids with ANSYS ...
Im doing my M.Tech project on 'Analysis of grinding using nano cutting fluids with ANSYS" . But ANSYS has to work at nano level.. So how to make programming to make ANSYS to use to solve nano level problems. ...
Im doing my M.Tech project on 'Analysis of grinding using nano cutting fluids with ANSYS" . But ANSYS has to work at nano level.. So how to make programming to make ANSYS to use to solve nano level problems. ...
|
|
orthogonal cutting using ansys | iMechanica
My present research On ultrasonic turning.I am using ansys for finite element modeling of ultrasonic turning.if any one have working on that field ,pls give some tutorial like orthogonal cutting using ansys and many more. ...
My present research On ultrasonic turning.I am using ansys for finite element modeling of ultrasonic turning.if any one have working on that field ,pls give some tutorial like orthogonal cutting using ansys and many more. ...
|
|
dielectric elestomeric actuator ,ansys | iMechanica
Computational Mechanics Forum · Dielectric elastomer modelling in ansys. HI. Can some one help me with ansys element type solid226. and circuit element 94. What real constants i need to give.?? Midhun ...
Computational Mechanics Forum · Dielectric elastomer modelling in ansys. HI. Can some one help me with ansys element type solid226. and circuit element 94. What real constants i need to give.?? Midhun ...
|
|
ANSYS, Inc. - Terrafugia's "Roadable Aircraft" Engineered with ...
Massachusetts-based Terrafugia used ANSYS(R) engineering simulation software to design and verify its new production prototype of the Transition(R) aircraft that also can drive on the highway, which was unveiled yesterday at the EAA ...
Massachusetts-based Terrafugia used ANSYS(R) engineering simulation software to design and verify its new production prototype of the Transition(R) aircraft that also can drive on the highway, which was unveiled yesterday at the EAA ...
|
|
Ansys Crack Rapidshare Free Full Downloads with Hotfile and ...
Ansys Crack Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
Ansys Crack Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
|
|
ANS - Ans - Ansys Limited - Results Of The Annual General Meeting ...
ANS - Ansys Limited - Results of the Annual General Meeting Ansys Limited (Incorporated in the Republic of South Africa) (Registration number: 1987/001222/06) (JSE code: ANS ISIN: ZAE000097028) ("Ansys" or "the company") Shareholders ...
ANS - Ansys Limited - Results of the Annual General Meeting Ansys Limited (Incorporated in the Republic of South Africa) (Registration number: 1987/001222/06) (JSE code: ANS ISIN: ZAE000097028) ("Ansys" or "the company") Shareholders ...
|
|
[ICEM] ICEM CFD Penetrating Elements/Surface Orientation Issues ...
Hello, I am doing some mesh manipulation in ICEM, and ran a mesh check after changes were made to the mesh. The mesh check uncovered both penetrating.
Hello, I am doing some mesh manipulation in ICEM, and ran a mesh check after changes were made to the mesh. The mesh check uncovered both penetrating.
|
|
Design gas turbine blades with film cooling and cooling ...
Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX.
Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX.
|
|
ansys????_nwpukang???_????
ansys????*get????????? *get,xx,node,i,loc,x ?????i????x??????i????x????xx. ?????????????????????? xx=nx(i)? nx(i)??ansys???????? ????ansys???????????? ...
ansys????*get????????? *get,xx,node,i,loc,x ?????i????x??????i????x????xx. ?????????????????????? xx=nx(i)? nx(i)??ansys???????? ????ansys???????????? ...
|
|
HPCwire: ANSYS Reports Continued Growth in Second Quarter 2010
ANSYS, Inc. today announced in-line performance against its outlook in revenue and over-performance in non-GAAP EPS for the second quarter of 2010.
ANSYS, Inc. today announced in-line performance against its outlook in revenue and over-performance in non-GAAP EPS for the second quarter of 2010.
|
|
LUSAS/ANSYS modelling help | iMechanica
For analysis I was trying to use ansys or lusas but not able to model proerly . I need help to model the following problem. 32 layer laminated plate length 300mm. width 250mm. delaminated between 8th and 9th layer from the top and ...
For analysis I was trying to use ansys or lusas but not able to model proerly . I need help to model the following problem. 32 layer laminated plate length 300mm. width 250mm. delaminated between 8th and 9th layer from the top and ...
|
|
Ansys.CFX.CEI.ENSIGHT.COMSOL.CRTECH.Fluent.LMS.MSC.UNIX.
CEI.ENSIGHT.COMSOL.CRTECH.Fluent.LMS.MSC.UNIX. Ansys.CFX.CEI.ENSIGHT.COMSOL.CRTECH.Fluent.LMS.MSC.UNIX. SYSTAT.Cadem.Cadlink.SignLab.Cimco.DELCAM.ARTCAM.GibbsCAM. Rapidshare,Megaupload,SendSpace,ZShare,FileFactory,4shared,ifile,ifolder ...
CEI.ENSIGHT.COMSOL.CRTECH.Fluent.LMS.MSC.UNIX. Ansys.CFX.CEI.ENSIGHT.COMSOL.CRTECH.Fluent.LMS.MSC.UNIX. SYSTAT.Cadem.Cadlink.SignLab.Cimco.DELCAM.ARTCAM.GibbsCAM. Rapidshare,Megaupload,SendSpace,ZShare,FileFactory,4shared,ifile,ifolder ...
|
|
Surface Crack Generation Tutorial In Ansys
surface crack generation tutorial in ansys Rapidshare surface crack generation tutorial in ansys Crack surface crack generation tutorial in ansys Megaupload surface crack generation tutorial in ansys torrent surface crack generation ...
surface crack generation tutorial in ansys Rapidshare surface crack generation tutorial in ansys Crack surface crack generation tutorial in ansys Megaupload surface crack generation tutorial in ansys torrent surface crack generation ...
|
|
How to model FRP in ANSYS or ABAQUS? | iMechanica
I am new to ANSYS and ABAQUS. Can anyone help me on modelling FRP in ANSYS or ABAQUS? The type of element I have to choose is a question for me. I want to model a steel beam upgraded with FRP. Best regards ...
I am new to ANSYS and ABAQUS. Can anyone help me on modelling FRP in ANSYS or ABAQUS? The type of element I have to choose is a question for me. I want to model a steel beam upgraded with FRP. Best regards ...
|
|
CFD Review | 2010 ANSYS South American Conference & ESSS Users Meeting
News Join us at the 2010 ANSYS South American Conference & ESSS Users Meeting and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce product ...
News Join us at the 2010 ANSYS South American Conference & ESSS Users Meeting and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce product ...
|
|
convergence problem in interface delamination modeling in ansys ...
im trying to model interface delamination in ansys. i use inter204 or 205 for interface element.the problem is that as the stress in interface riches the yield value, the solution doesnt converge. i tried to increase the number of ...
im trying to model interface delamination in ansys. i use inter204 or 205 for interface element.the problem is that as the stress in interface riches the yield value, the solution doesnt converge. i tried to increase the number of ...
|
|
ANSYS, Inc. - ANSYS Leader Honored with World Class Award by ...
PITTSBURGH, Jun 04, 2010 (BUSINESS WIRE) -- ANSYS (NASDAQ: ANSS) President and CEO Jim Cashman was honored last evening by the Southpointe CEO Association as part of its World Class Chief Executive Series. ...
PITTSBURGH, Jun 04, 2010 (BUSINESS WIRE) -- ANSYS (NASDAQ: ANSS) President and CEO Jim Cashman was honored last evening by the Southpointe CEO Association as part of its World Class Chief Executive Series. ...
|
|
what is ansys? - Mechanical Engineering Forum
hello... i want to know what's ansys about? how does it differ from other softwareslike pro e or mastercam?
hello... i want to know what's ansys about? how does it differ from other softwareslike pro e or mastercam?
|
|
SENIOR EQUIPMENT STRESS ENGINEER - WCSI - Roadtechs.com Nuclear ...
Requires modeling utilizing ANSYS of complicated pressure vessels with internals, supporting stress analysis and design calculations for design development in accordance with DOE and ASME Codes requirements. ...
Requires modeling utilizing ANSYS of complicated pressure vessels with internals, supporting stress analysis and design calculations for design development in accordance with DOE and ASME Codes requirements. ...
|
|
ansys fluent 13 preview -- CFD Online Discussion Forums
Hi anyone out there with some esperience with the BETA of the new fluent version 13 (fluent preview version 13) that was available from the ansys.
Hi anyone out there with some esperience with the BETA of the new fluent version 13 (fluent preview version 13) that was available from the ansys.
|
|
Video: Cashman Says Ansys Has Returned to `Double Digit' Growth: Video
23 (Bloomberg) ? James Cashman, chief executive officer of Ansys Inc., talks about the company's performance and outlook. Cashman also discusses Ansys's services and prospects for alternative-energy vehicles. He talks with Matt Miller ...
23 (Bloomberg) ? James Cashman, chief executive officer of Ansys Inc., talks about the company's performance and outlook. Cashman also discusses Ansys's services and prospects for alternative-energy vehicles. He talks with Matt Miller ...
|
|
ANSYS, Inc. - ANSYS Reports Strong Revenue and Earnings Growth for ...
PITTSBURGH, May 06, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), today announced over-performance against its outlook in both revenue and non-GAAP EPS for the first quarter 2010. Growth in the first quarter was spread across all ...
PITTSBURGH, May 06, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), today announced over-performance against its outlook in both revenue and non-GAAP EPS for the first quarter 2010. Growth in the first quarter was spread across all ...
|
|
ANSYS India | Jobs Section
Sr. Java/J2EE Developer 1 Opening(s) Summary Experience: 0 - 4 Years Location: Pune Education: UG - B.Tech/BE - Any Specialization,BCA - ComputersPG - M.Tech - Any Specialization,MCA - Computers Industry Type: IT-Software/ Software ...
Sr. Java/J2EE Developer 1 Opening(s) Summary Experience: 0 - 4 Years Location: Pune Education: UG - B.Tech/BE - Any Specialization,BCA - ComputersPG - M.Tech - Any Specialization,MCA - Computers Industry Type: IT-Software/ Software ...
|
|
Rolling Contact Fatigue in Ansys Multiphysics | iMechanica
If you are really looking at the analysis using ANSYS, these three papers might help. They include both S-N curve-based and fracture mechanics-based approaches. The focus is on the shattered rim failure (subsurface cracking) rather than ...
If you are really looking at the analysis using ANSYS, these three papers might help. They include both S-N curve-based and fracture mechanics-based approaches. The focus is on the shattered rim failure (subsurface cracking) rather than ...
|
|
SIF for 3D crack in ANSYS | iMechanica
I am searching for procedure to calculate stress intensity factor of bonded repair of cracked plate, so any one has any idea how to calculate stress intensity factor in 3D crack model By ANSYS, please guide me. I need your help. ...
I am searching for procedure to calculate stress intensity factor of bonded repair of cracked plate, so any one has any idea how to calculate stress intensity factor in 3D crack model By ANSYS, please guide me. I need your help. ...
|
|
Modal Analysis in Ansys to get natural frequencies and compare ...
ANSYS ANALYSIS ABOUT NATURAL FREQUENCIES (e.g. ANSYS gave me a first mode frequency of 300Hz roughly,on the other hand, theory by f=(Kn/2*PI)*sqrt(EI/w*L^4); where w=width=1mm,L=3cm,Kn=3.52 for first mode roughly, gave me E+4 m order of ...
ANSYS ANALYSIS ABOUT NATURAL FREQUENCIES (e.g. ANSYS gave me a first mode frequency of 300Hz roughly,on the other hand, theory by f=(Kn/2*PI)*sqrt(EI/w*L^4); where w=width=1mm,L=3cm,Kn=3.52 for first mode roughly, gave me E+4 m order of ...
|
|
HPCwire: Tetra Pak Chooses ANSYS for Product Development Simulation
Tetra Pak, the leader in food processing and packaging solutions, has expanded its use of ANSYS products.
Tetra Pak, the leader in food processing and packaging solutions, has expanded its use of ANSYS products.
|
|
[ICEM] Hybrid mesh -- CFD Online Discussion Forums
Hi, everybody. I want to generate a hybrid mesh which is comprised of hexahedra and quad-surface mesh. The computation domain is two dimension, and 2D.
Hi, everybody. I want to generate a hybrid mesh which is comprised of hexahedra and quad-surface mesh. The computation domain is two dimension, and 2D.
|
|
Stress intensity factor for 3D crack in ansys | iMechanica
Right now i am stuck with a problem where i am not able analyze SIF (K1, K2, K3) for a 3D crack in ansys. Ansys asks the path for K value and i am choosing 5 nodes along the 2 crack edges for a full crack model and I also went for both ...
Right now i am stuck with a problem where i am not able analyze SIF (K1, K2, K3) for a 3D crack in ansys. Ansys asks the path for K value and i am choosing 5 nodes along the 2 crack edges for a full crack model and I also went for both ...
|
|
Electromagnetic modelling in Ansys | iMechanica
I have a problem modelling electrical conduction in Ansys. I started with a 2D model where two current excitation sources are applied (one positive and the other negative). I use the potential difference at two opposite points to ...
I have a problem modelling electrical conduction in Ansys. I started with a 2D model where two current excitation sources are applied (one positive and the other negative). I use the potential difference at two opposite points to ...
|
|
Ansys Rapidshare Free Full Downloads with Hotfile and MegaUpload ...
Ansys Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
Ansys Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
|
|
Boosting ANSYS Mechanical Simulation Capacity with Intel® SATA ...
One of the main factors limiting the size of simulations that can be run on workstations is the amount of physical memory (RAM) available on the machine. Solid-state drives are a cost-effective way to manage memory requirements on ...
One of the main factors limiting the size of simulations that can be run on workstations is the amount of physical memory (RAM) available on the machine. Solid-state drives are a cost-effective way to manage memory requirements on ...
|
|
ANSYS LS-DYNA time integration | iMechanica
I have a trouble when I want to made a simulation using ANSYS LS-Dyna, because first of all my model implicate couple 200000 elements, which means 2 parts in contact and second part which must interact with first 2 part. ...
I have a trouble when I want to made a simulation using ANSYS LS-Dyna, because first of all my model implicate couple 200000 elements, which means 2 parts in contact and second part which must interact with first 2 part. ...
|
|
No. 09-2634 - ANSYS INC v. COMPUTATIONAL DYNAMICS NORTH AMERICA ...
ANSYS, Inc. (?ANSYS?) is a company that produces propriety software in the field of computational fluid dynamics (?CFD?). In August 2009, ANSYS sued its former employee, Dr. Doru Caraeni, and his new employer, Computational Dynamics ...
ANSYS, Inc. (?ANSYS?) is a company that produces propriety software in the field of computational fluid dynamics (?CFD?). In August 2009, ANSYS sued its former employee, Dr. Doru Caraeni, and his new employer, Computational Dynamics ...
|
|
How to model helical spring in ansys | iMechanica
How to model helical spring in ansys. Submitted by Jasjitmann on Tue, 2010-07-13 17:58. education. Hello All,. I am modeling helical spring wounded on the surface of cylindrical shell. High aspect ratio of helical wire creates problem ...
How to model helical spring in ansys. Submitted by Jasjitmann on Tue, 2010-07-13 17:58. education. Hello All,. I am modeling helical spring wounded on the surface of cylindrical shell. High aspect ratio of helical wire creates problem ...
|
|
ANSYS Tutorial
ANSYS tutorial Rapidshare ANSYS tutorial Crack ANSYS tutorial Megaupload ANSYS tutorial torrent ANSYS tutorial serial, Full Versions Rapidshare Direct Results Download ANSYS tutorial from Rapidshare Crack Torrent Download. ...
ANSYS tutorial Rapidshare ANSYS tutorial Crack ANSYS tutorial Megaupload ANSYS tutorial torrent ANSYS tutorial serial, Full Versions Rapidshare Direct Results Download ANSYS tutorial from Rapidshare Crack Torrent Download. ...
|
|
wind turbine simulation, Ansys Post results question
Hi, I've simulated 1/3 of a wind turbine (just one blade). I can not get the correct result...I belive the boundary conditions are OK as well as the convergence (residual set to 1e-5). The mesh is not fine enough but that's not the ...
Hi, I've simulated 1/3 of a wind turbine (just one blade). I can not get the correct result...I belive the boundary conditions are OK as well as the convergence (residual set to 1e-5). The mesh is not fine enough but that's not the ...
|
|
Terrafugia's ?Roadable Aircraft? Engineered With Virtual ...
Massachusetts-based Terrafugia used ANSYS® engineering simulation software to design and verify its new production prototype of the Transition® aircraft that also can drive on the highway, which was unveiled yesterday at the EAA ...
Massachusetts-based Terrafugia used ANSYS® engineering simulation software to design and verify its new production prototype of the Transition® aircraft that also can drive on the highway, which was unveiled yesterday at the EAA ...
|
|
Software Development Engineer / Ansys Fluent India Private Limited ...
HTML clipboard Software Development Engineer / Ansys Fluent India Private Limited / Pune Experience : 0 - 3 Years Location : Pune Education : UG - B.Te.
HTML clipboard Software Development Engineer / Ansys Fluent India Private Limited / Pune Experience : 0 - 3 Years Location : Pune Education : UG - B.Te.
|
|
Problem with modelling contact in ansys fluent 12.1 -- CFD Online ...
Hi, I am modelling a 3 zone problem (2 Solid zones and one fluid). It is consisted of a steel die that is in contact with an aluminium tube which.
Hi, I am modelling a 3 zone problem (2 Solid zones and one fluid). It is consisted of a steel die that is in contact with an aluminium tube which.
|
|
Look for Shares of ANSYS to Rebound after Yesterday's 1.50% Sell ...
ANSYS (NASDAQ:ANSS) traded in a range yesterday that spanned from a low of $38.69 to a high of $39.43. Yesterday, the shares fell 1.50%, which took the trading range below the 3-day low of $39.08 on volume of 769000 shares. ...
ANSYS (NASDAQ:ANSS) traded in a range yesterday that spanned from a low of $38.69 to a high of $39.43. Yesterday, the shares fell 1.50%, which took the trading range below the 3-day low of $39.08 on volume of 769000 shares. ...
|
|
Ansys Products 12.1 ADDON (04-02-20010) crack - Vox
Title:Ansys Products 12.1 ADDON (04-02-20010) crack #Tags:ansys,products,addon.
Title:Ansys Products 12.1 ADDON (04-02-20010) crack #Tags:ansys,products,addon.
|
|
CivilFEM v12.0 x64. » Sky DL - Download file fileserve rapidshare ...
CivilFEM - is a specialized tack on-on to ANSYS for the construction tasks, developed by Spanish companionship Ingeciber. By embedding in the menu ANSYS, CivilFEM complements his extensive-purpose capabilities, the usual estimator for ...
CivilFEM - is a specialized tack on-on to ANSYS for the construction tasks, developed by Spanish companionship Ingeciber. By embedding in the menu ANSYS, CivilFEM complements his extensive-purpose capabilities, the usual estimator for ...
|
|
[ICEM] Proper way to name boundaries on 2D model for use in CFX ...
I'm trying to mesh a fairly simple structure in 2D (2.5D for CFX) for use in ANSYS CFX in ICEM CFD as the mesher in ANSYS workbench is not giving me.
I'm trying to mesh a fairly simple structure in 2D (2.5D for CFX) for use in ANSYS CFX in ICEM CFD as the mesher in ANSYS workbench is not giving me.
|
|
Fluent Ansys Rapidshare Free Full Downloads with Hotfile and ...
Fluent Ansys Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
Fluent Ansys Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
|
|
Design gas turbine blades with film cooling and cooling ...
Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX 12.0. Somebody have any handbook or manual of Bladedesign or BladeGen 12.0 ? ...
Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX 12.0. Somebody have any handbook or manual of Bladedesign or BladeGen 12.0 ? ...
|
|
ANSYS HPC simulation appliance, 'engineer ready' supercomputing ...
The appliance puts ANSYS simulation software installed and ready to run on hardware from Dell, all pre-integrated into a hardware+software package that customers can order ready to plug in. ANSYS develops engineering simulation software ...
The appliance puts ANSYS simulation software installed and ready to run on hardware from Dell, all pre-integrated into a hardware+software package that customers can order ready to plug in. ANSYS develops engineering simulation software ...
|
|
introduction to ansys
Hii to every cfd member and all guests I am new to FEM analysis and I want to know the difference between ansys and abaqus. If anybody know then tell me or plz contact me in the following link: ...
Hii to every cfd member and all guests I am new to FEM analysis and I want to know the difference between ansys and abaqus. If anybody know then tell me or plz contact me in the following link: ...
|
|
Schnitger Corporation Hot Topics
ANSYS reported Q2 results today that met the company's earlier forecasts but foreshadowed a coming slowdown. Total revenue for Q2 was $137.8 million, up 12.9% from $122.0 million a year ago and up 15% for the year-to-date -- showing the ...
ANSYS reported Q2 results today that met the company's earlier forecasts but foreshadowed a coming slowdown. Total revenue for Q2 was $137.8 million, up 12.9% from $122.0 million a year ago and up 15% for the year-to-date -- showing the ...
|
|
Results file in Ansys | iMechanica
We modelled an Underslung truss bridge in Ansys.After applying moving loads on the bridge to find augment,when we r solving it ,we are getting an error and Ansys is showing "Number of results on results file exceeds maximum of 1000 ...
We modelled an Underslung truss bridge in Ansys.After applying moving loads on the bridge to find augment,when we r solving it ,we are getting an error and Ansys is showing "Number of results on results file exceeds maximum of 1000 ...
|
|
ANSYS products v12.1.1 - ::LAVteam::
With direct interfaces to all major CAD systems, support of additional readers and translators, and an integrated geometry modeler exclusively focused on analysis, ANSYS offers the most comprehensive geometry handling solutions for ...
With direct interfaces to all major CAD systems, support of additional readers and translators, and an integrated geometry modeler exclusively focused on analysis, ANSYS offers the most comprehensive geometry handling solutions for ...
|
|
ANSYS Integrates Advanced Fatigue Capabilities from HBM-nCode ...
Seamless design optimization from ANSYS, Inc. now incorporates the advanced fatigue capabilities of nCode DesignLifeTM, a leading durability software from HBM used by OEMs and their suppliers around the world. ANSYS(R) nCode DesignLife ...
Seamless design optimization from ANSYS, Inc. now incorporates the advanced fatigue capabilities of nCode DesignLifeTM, a leading durability software from HBM used by OEMs and their suppliers around the world. ANSYS(R) nCode DesignLife ...
|
|
Viscoelasticity model using Ansys | iMechanica
I have found to determine the Prony series coefficients Ansys need shear and bulk modulus as a function of time-temperature. Does it mean complex shear moduls which can be calculated from storage and loss modulus. ...
I have found to determine the Prony series coefficients Ansys need shear and bulk modulus as a function of time-temperature. Does it mean complex shear moduls which can be calculated from storage and loss modulus. ...
|
|
ANSYS 12 Training Manual working link generator registration code ...
Producer: ANSYS,Inc.Year: 2009Language: English Lessons on ANSYS 12Lessons (PowerPoint),sample files,video results.Ingredients:1.ANSYS Explicit.
Producer: ANSYS,Inc.Year: 2009Language: English Lessons on ANSYS 12Lessons (PowerPoint),sample files,video results.Ingredients:1.ANSYS Explicit.
|
|
Pushover Analysis in ANSYS | iMechanica
Pushover Analysis in ANSYS. Submitted by tzirakian on Sun, 2010-07-04 01:40. Does anyone have any idea on how to perform Pushover Analysis in ANSYS? I think it should be the same Static Anlysis in ANSYS. Any ideas? Thanks. ...
Pushover Analysis in ANSYS. Submitted by tzirakian on Sun, 2010-07-04 01:40. Does anyone have any idea on how to perform Pushover Analysis in ANSYS? I think it should be the same Static Anlysis in ANSYS. Any ideas? Thanks. ...
|
|
Error in ansys Workbench 12.1 -- CFD Online Discussion Forums
Hi all, I've installed Ansys 12.1 on Windows XP Pro 64 bit machine. When I right click on the geometry to edit it, the Design modeller wont start. It.
Hi all, I've installed Ansys 12.1 on Windows XP Pro 64 bit machine. When I right click on the geometry to edit it, the Design modeller wont start. It.
|
|
export data from fluent to ansys -- CFD Online Discussion Forums
hi everybody. im working in a simulation to obation the thermal stress in a specific body. i use fluent to obtain the temperatures in the body. i.
hi everybody. im working in a simulation to obation the thermal stress in a specific body. i use fluent to obtain the temperatures in the body. i.
|
|
Ansys Rotor Rapidshare Free Full Downloads with Hotfile and ...
Ansys Rotor Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
Ansys Rotor Rapidshare Free Full Downloads Rapidshare MegaUpload Hotfile Torrent.
|
|
ANSYS, Inc. - ANSYS to Release First Quarter 2010 Earnings on May ...
SOUTHPOINTE, Pa., Apr 14, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS) announced today that the global innovator of simulation software and technologies designed to optimize product development processes expects to release its ...
SOUTHPOINTE, Pa., Apr 14, 2010 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS) announced today that the global innovator of simulation software and technologies designed to optimize product development processes expects to release its ...
|
|
ANSYS, Inc. - ANSYS Trading Higher on 1.4x Above-Average Volume (ANSS)
May 06, 2010 (SmarTrend(R) News Watch via COMTEX News Network) -- Shares of ANSYS (NASDAQ:ANSS) are trading up 1.9% to $44.66 today on above average volume. Approximately 936000 shares have traded hands today vs. average 30-day volume ...
May 06, 2010 (SmarTrend(R) News Watch via COMTEX News Network) -- Shares of ANSYS (NASDAQ:ANSS) are trading up 1.9% to $44.66 today on above average volume. Approximately 936000 shares have traded hands today vs. average 30-day volume ...
|
|
Related Images
WHERE iS the TORRENT 2009
[ www.witorrent.com | www.wicontent.net ]
[ Loaded in: 00.3ms | Server: Sushuna | Load: LOW | Safe: on | Lang: en]